ATOS ScanBox Series 7 & 8

Fully automated 3D scanning of large parts

ATOS ScanBox series 7 and 8 is an automated 3D metrology system from GOM based on 3D scanning and robot technology. The series combines the newest technology with automation and high safety standards.

Common for the series 7 and 8 is a rail mounted 3D scanning robot, with an integrated lift system for increased flexibility. A rotation table is absent from the primary working area, instead parts are transported into the working area on fixtures.
 
ATOS ScanBox series 8 differs from series 7 by having two robots and consequently two scanners. Each robot is mounted on its own rail/lift system, allowing measurements of large parts to be conducted from both sides simultaneously. 

Integrated external rotation tables

Both series can be extended with rotation tables placed outside of the primary working area. A vertical sliding door allows for 3D scanning on the rotation table, meanwhile new parts can be prepared in the main working area. The rotation table can be installed on either side of the system.

In the case of ATOS ScanBox series 8, a rotation table can be installed on both sides, for maximum output. All entrances are secured by light sensors. 

ATOS ScanBox series 7 and 8 utilize the ATOS Triple Scan.

 

ATOS ScanBox 7260 with rotation table and ATOS Triple Scan
ATOS ScanBox 7260
ATOS ScanBox 8260 with rotation table and two ATOS Triple Scan
ATOS ScanBox 8260

Quality control of essential parts
With the patented 8-axis robotics system, both series 7 and 8 perform full-field scanning of large parts, which are not suitable for a rotation table due to size or weight.

A complete geometric part verification ensures that high value parts meet the specified quality level.

By installing rotation tables next to the system, the output can be increased, as parts can be prepared at the rotation table area, while scanning takes place in the primary working area, and vice versa.

ATOS ScanBox series7 ATOS ScanBox series8
Dimensions 4750 x 10150 x 3900 mm 5750 x 10150 x 3900 mm
Powersupply 200-500 V
(3-phase, 16 A)
2 x 200-500 V
(3-phase, 16 A)
Max. part size 6000 x 1250 mm 6000 x 2500 mm
Max. part weight Unlimited Unlimited
number of scanners 1 2
Automated axes 8-9 16-18
Rotation tables 0-1 0-2
Entry Light sensor Light sensor
Opening width 3050 mm 3050 mm
Floor mounting Yes Yes
Loading concept Manual, crane, truck Manual, crane, truck

Contact

Jeppe H. Laursen
CEO

+45 4196 4955
jhl@zebicon.com

Danish distributor

Zebicon is the danish distributor of 3D measurement systems by GOM, who is developing and producing high precision metrology solutions.  

Read about GOM